Industrial Router

Home ❯ Products ❯ Industrial Wireless ❯ Cellular ❯ Industrial Router
MIR682-Exi Industrial 5G Embedded Router
  • 1×100M WAN Port, 1×100M LAN Port, 1×RS485 Serial Port
  • 4×5G Antenna Interface, 2×Nano SIM Card Slots
Features and Benefits
  • Support 5G/4G/3G cellular wireless network and WAN port wired network backup
  • Support serial port terminal device networking, can convert UDP, TCP, Modbus, HTTPD, WebSocket, MQTT and other protocols, and Support virtual serial port
  • Support the standard MQTT protocol and can connect to Alibaba Cloud, OneNet, Tencent Cloud, Huawei Cloud, Maiwei Cloud or other cloud platforms to realize the interconnection of everything between the device and the cloud
  • Support Modbus slave pre-reading, JSON uploading and issuing functions
  • Support firewall and service functions such as port mapping, DMZ, intranet penetration, IP/MAC speed limit/filtering, DDNS, VPN, SNMP, LLDP, etc.
  • Support DC 9~24V power input, Support anti-reverse connection, slow start, current limiting and voltage limiting protection, and complies with intrinsically safe circuit design standards
  • Support -40~+70℃ operating temperature to meet the application needs of industrial environment
GET A QUOTE
  • Overview
  • Specifications
  • Downloads
  • Models
Product Description

The MIR682-Exi series is an embedded intrinsically safe 5G industrial router that meets intrinsically safe design requirements. It integrates serial device networking and Support WAN wired or 5G cellular wireless networks; it provides 1 100M WAN port, 1 100M LAN port, 1 channel RS485 serial port, 4 channels 5Gantenna Interface and 1 channel DC9~24V power input. The power supply Support anti-reverse connection, slow start, current limiting and voltage limiting protection; it adopts embedded Installation method to meet the needs of various network sites.

The product Support WEB configuration of various network management functions, such as WAN mode, PPPoE dial-up, DHCP server, 5G network standard, APN, IP/MAC binding, static routing, link check, network diagnosis, serial port to network, firewall, VPN, SNMP , LLDP, cloud services, NTP, etc.; the system provides user management with different permissions, Support local/remote log management, Support scheduled restart, configuration backup and recovery, firmware upgrade, and factory reset. It Support one-click restart or factory settings restoration, and the indicator signal pin can be externally referenced. The hardware adopts a fanless, intrinsically safe design, with selected industrial-grade components, supporting -40~+70℃ operating temperature. The power supply complies with intrinsically safe circuit design standards and has passed strict safety and EMC tests to meet the harsh industrial environment. Application requirements. Products can be widely used in industrial automation, integrated energy, intelligent transportation, smart cities, smart mines and other fields. 

Features and Benefits
  1. Support 5G/4G/3G cellular wireless network and WAN port wired network, Support dual network backup
  2. Support MIMO multiple input and multiple output to increase data transmission rate, expand network capacity and wireless coverage, and reduce data packet loss
  3. The WAN port supports DHCP protocol, static address, PPPoE dial-up, etc. to connect to the external network, or can be used as a LAN port to connect to the intranet
  4. The LAN port supports DHCP server to centrally dynamically manage and configure user IP addresses.
  5. 5G network supports 5G NR NSA and SA dual-module networking, is compatible with 4G/3G, supports 5G/4G three-network universal, dual-SIM single standby, and APN
  6. Support link check, periodically check the 5G network link status, and perform link recovery
  7. Support IPv4/IPv6 Ping, IPv4/IPv6 Traceroute, Nslookup, and packet capture for network diagnosis or fault analysis
  8. The firewall supports SYN-flood defense, port mapping, IP/MAC/DNS address filtering, iptables command custom rules, DMZ isolation zone, UPnP, IP/MAC speed limit, QoS limit upload/download rate and other functions
  9. Support NTP client and server functions, can perform clock synchronization or provide clock source
  10. Log information records multiple levels of kernel, application and network information, and supports local downloading, scheduled saving, and remote monitoring.
  11. The serial port supports UDP, TCP Client/Server, UDP Multicast, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, Realcom MCP/CCP/MW, Pair Connection Master/Slave, Httpd Client, WebSocket Client, MQTT and other serial port conversions mode to realize serial port to Ethernet
  12. Support Peanut Shell intranet penetration, and can use Peanut Shell dynamic domain name to remotely log in and manage equipment
  13. Support dynamic DNS function, and can remotely log in and manage the device through the specified domain name
  14. Support VPN client and server to build a private network. The client supports tunnel protocols such as PPTP, L2TP, IPSec, OpenVPN, GRE, and SSTP. The server Support protocols such as PPTP, L2TP, and IPSec.
  15. Support SNMPv1/v2c, and can conduct information query, information modification and troubleshooting through MIB to achieve centralized management
  16. Support LLDP, obtains LLDP neighbor device information, and monitors link status to facilitate topology management and fault location
  17. Support Maiwe cloud platform management to realize remote management of equipment and monitoring of on-site network status

Software

Network management function

Support traffic statistics, running status, network status, local address and other status information

Support static address, DHCP, PPPoE external network connection, support WAN/LAN mode

Support DHCP server, IP/MAC binding

Support 5G/4G/3G network, dual-SIM management, APN, link check

Support static routing

Support serial port to network, peanut shell intranet penetration, dynamic DNS, SNMP, LLDP, cloud services

Support PPTP/L2TP/GRE/TUN/TAP/SSTP protocol VPN client

Support PPTP/L2TP/IPSec protocol VPN server

firewall

Support SYN-flood defense, IP dynamic camouflage, MSS clamping, inbound/outbound data control

Support WAN/LAN port TCP/UDP port mapping

Support IP/MAC/domain name filtering, iptables, DMZ, UPnP, IP/MAC/QoS rate limiting

System Management

Support IPv4/IPv6 Ping, IPv4/IPv6 Traceroute, Nslookup, and capture network packets

Support time zone, NTP client/server, management port, Crontab, remote/local log

Support user rights management and SSH access

Support online restart, scheduled restart, configuration backup/restore, firmware flash, and factory settings restore

 

MIR682-Exi-QG

MIR682-Exi-UC

Network format

5G NR SA/NSA、LTE-FDD、LTE-TDD、WCDMA

Working frequency

5G NR SA：n77/78/79

5G NR NSA：n41/77/78/79

LTE-FDD： B1/2/3/4/5/7/8/12/13/

14/17/18/19/20/25/26/

28/29/30/32/66/71

LTE-TDD： B34/38/39/40/41/42/

43/48

WCDMA：B1/2/3/4/5/8/19

5G NR SA：n1/41/77/78/79

5G NR NSA：n41/78/79

LTE-FDD：B1/2/3/5/7/8/20/28

LTE-TDD：B34/38/39/40/41

WCDMA：B1/2/5/8

MIMO

DL 4 × 4： n41/n77/n78/n79，

B1/2/3/4/7/25/30/38/39/

40/41/42/43/48/66

UL 2 × 2：n41/n77/n78/n79

DL 4 × 4：n1/41/77/78/79

UL 2 × 2：n41/77/78/79

DL 2 × 2：LTE

Maximum transmission rate (theoretical value)

5G SA Sub-6： DL 2.1Gbps/

UL 900Mbps

5G NSA Sub-6： DL 2.5Gbps/

UL 650Mbps

LTE：DL 1.0Gbps/ UL 200Mbps

UMTS（DC-HSDPA/HSUPA）：

DL 42Mbps/ UL 5.76Mbps

WCDMA：DL / UL 384 kbps

5G SA Sub-6： DL 2Gbps/

UL 1Gbps

5G NSA Sub-6： DL 2.2Gbps/

UL 575Mbps

LTE：DL 600Mbps/ UL 150Mbps

UMTS（DC-HSDPA/HSUPA）：

DL 42.2Mbps/ UL 11Mbps

WCDMA：DL / UL 384 kbps

Maximum transmit power

5G NR：23dBm±2dB

LTE：23dBm±2dB

WCDMA：24dBm+1/-3dB

5G NR n1/41：23dBm±2dB

5G NR n77/78/79：23dBm+2/-3dB LTE：23dBm±2dB

WCDMA：24dBm+1/-3dB

Receive sensitivity

5G NR-TDD：

-92dBm(n41)/ -92.9dBm(n77)/

-92.9dBm(n78)/ -89.7dBm(n79)

LTE-FDD：

-96.3dBm(B1)/ -94.3dBm(B2)/

-93.3dBm(B3)/ -96.3dBm(B4)/

-94.3dBm(B5/7)/ -93.3dBm(B8)/

-95.3dBm(B9)/

-93.3dBm(B12/13/14/17)/

-96.3dBm(B18/19)/

-93.3dBm(B20)/-92.8dBm(B25)/

-93.8dBm(B26)/-94.8dBm(B28)/

-95.3dBm(B30/32)

LTE-TDD：

-96.3dBm(B34/38/39/40)/

-94.3dBm(B41)/

-95dBm(B42/43/48)

WCDMA：

-106.7dBm(B1)/-104.7dBm(B2)/

-103.7dBm(B3)/-106.7dBm(B4)/

-104.7dBm(B5)/-103.7dBm(B8)/

-104.7dBm(B19)

LTE-FDD：

-96.3dBm(B1)/ -94.3dBm(B2)/

-93.3dBm(B3)/ -94.3dBm(B5/7)/

-93.3dBm(B8/20)/ -94.8dBm(B28)

LTE-TDD：

-96.3dBm(B34/38/39/40)/

-94.3dBm(B41)

WCDMA：

-106.7dBm(B1)/ -104.7dBm(B2/5)/

-103.7dBm(B8)

Interface

100M WAN

1 channel 10/100Base-T(X) adaptive 100M RJ45 WAN port (Support LAN mode), Support full/half duplex, MDI/MDI-X adaptive, and Support 1.5kV electromagnetic isolation

100M LAN

1 channel 10/100Base-T(X) adaptive 100M RJ45 LAN port, Support full/half duplex, MDI/MDI-X adaptive, Support 1.5kV electromagnetic isolation

serial port

Serial port type: 1 channel RS485

Connection method: 3.81mm pitch 3PIN terminal block

Baud rate: 300bps-230400bps

Data bits: 5bit, 6bit, 7bit, 8bit

Stop bit: 1bit, 2bit

Check digit: None, Odd, Even

Terminal resistor: Built-in 120Ω terminal resistor, set through jumper cap

Serial port isolation: 2.5kVDC

antenna interface

4-way SMA-K (external thread internal hole) antenna Interface for connecting 5G cellular antennas

SIM card interface

2-way Nano SIM card slot, dual SIM card single standby, Support 5G/4G triple network and 3G China Unicom

indicator light

Power indicator light, operation indicator light, LAN port indicator light, WAN port indicator light, serial port indicator light, mobile network indicator light, mobile signal strength indicator light, support external indicator light pins

Power Supply

power input

DC 9~24V

Power consumption

<5.5W@DC12V (full load)

MIR682-Exi-QG (Qualcomm module) can be used with 900mA@18V intrinsically safe power supply

MIR682-Exi-UC can be used with 1.5A@12V intrinsically safe power supply and meets the intrinsically safe ib certification requirements

Connection method

5.08mm pitch 2PIN terminal block

Power protection

Anti-reverse connection, slow start, current limiting protection, voltage limiting protection

Physical Characteristics

Dimension

1108522.6 (mm) (excluding interface)

Installation method

Embedded installation

weight

About 0.13kg (excluding antenna)

Working Environment

Operating temperature

-40℃~+70℃

storage temperature

-40℃~+85℃

Relative humidity

5%~95% 

Specifications

Software

Network management function

Support traffic statistics, running status, network status, local address and other status information

Support static address, DHCP, PPPoE external network connection, support WAN/LAN mode

Support DHCP server, IP/MAC binding

Support 5G/4G/3G network, dual-SIM management, APN, link check

Support static routing

Support serial port to network, peanut shell intranet penetration, dynamic DNS, SNMP, LLDP, cloud services

Support PPTP/L2TP/GRE/TUN/TAP/SSTP protocol VPN client

Support PPTP/L2TP/IPSec protocol VPN server

firewall

Support SYN-flood defense, IP dynamic camouflage, MSS clamping, inbound/outbound data control

Support WAN/LAN port TCP/UDP port mapping

Support IP/MAC/domain name filtering, iptables, DMZ, UPnP, IP/MAC/QoS rate limiting

System Management

Support IPv4/IPv6 Ping, IPv4/IPv6 Traceroute, Nslookup, and capture network packets

Support time zone, NTP client/server, management port, Crontab, remote/local log

Support user rights management and SSH access

Support online restart, scheduled restart, configuration backup/restore, firmware flash, and factory settings restore

 

MIR682-Exi-QG

MIR682-Exi-UC

Network format

5G NR SA/NSA、LTE-FDD、LTE-TDD、WCDMA

Working frequency

5G NR SA：n77/78/79

5G NR NSA：n41/77/78/79

LTE-FDD： B1/2/3/4/5/7/8/12/13/

14/17/18/19/20/25/26/

28/29/30/32/66/71

LTE-TDD： B34/38/39/40/41/42/

43/48

WCDMA：B1/2/3/4/5/8/19

5G NR SA：n1/41/77/78/79

5G NR NSA：n41/78/79

LTE-FDD：B1/2/3/5/7/8/20/28

LTE-TDD：B34/38/39/40/41

WCDMA：B1/2/5/8

MIMO

DL 4 × 4： n41/n77/n78/n79，

B1/2/3/4/7/25/30/38/39/

40/41/42/43/48/66

UL 2 × 2：n41/n77/n78/n79

DL 4 × 4：n1/41/77/78/79

UL 2 × 2：n41/77/78/79

DL 2 × 2：LTE

Maximum transmission rate (theoretical value)

5G SA Sub-6： DL 2.1Gbps/

UL 900Mbps

5G NSA Sub-6： DL 2.5Gbps/

UL 650Mbps

LTE：DL 1.0Gbps/ UL 200Mbps

UMTS（DC-HSDPA/HSUPA）：

DL 42Mbps/ UL 5.76Mbps

WCDMA：DL / UL 384 kbps

5G SA Sub-6： DL 2Gbps/

UL 1Gbps

5G NSA Sub-6： DL 2.2Gbps/

UL 575Mbps

LTE：DL 600Mbps/ UL 150Mbps

UMTS（DC-HSDPA/HSUPA）：

DL 42.2Mbps/ UL 11Mbps

WCDMA：DL / UL 384 kbps

Maximum transmit power

5G NR：23dBm±2dB

LTE：23dBm±2dB

WCDMA：24dBm+1/-3dB

5G NR n1/41：23dBm±2dB

5G NR n77/78/79：23dBm+2/-3dB LTE：23dBm±2dB

WCDMA：24dBm+1/-3dB

Receive sensitivity

5G NR-TDD：

-92dBm(n41)/ -92.9dBm(n77)/

-92.9dBm(n78)/ -89.7dBm(n79)

LTE-FDD：

-96.3dBm(B1)/ -94.3dBm(B2)/

-93.3dBm(B3)/ -96.3dBm(B4)/

-94.3dBm(B5/7)/ -93.3dBm(B8)/

-95.3dBm(B9)/

-93.3dBm(B12/13/14/17)/

-96.3dBm(B18/19)/

-93.3dBm(B20)/-92.8dBm(B25)/

-93.8dBm(B26)/-94.8dBm(B28)/

-95.3dBm(B30/32)

LTE-TDD：

-96.3dBm(B34/38/39/40)/

-94.3dBm(B41)/

-95dBm(B42/43/48)

WCDMA：

-106.7dBm(B1)/-104.7dBm(B2)/

-103.7dBm(B3)/-106.7dBm(B4)/

-104.7dBm(B5)/-103.7dBm(B8)/

-104.7dBm(B19)

LTE-FDD：

-96.3dBm(B1)/ -94.3dBm(B2)/

-93.3dBm(B3)/ -94.3dBm(B5/7)/

-93.3dBm(B8/20)/ -94.8dBm(B28)

LTE-TDD：

-96.3dBm(B34/38/39/40)/

-94.3dBm(B41)

WCDMA：

-106.7dBm(B1)/ -104.7dBm(B2/5)/

-103.7dBm(B8)

Interface

100M WAN

1 channel 10/100Base-T(X) adaptive 100M RJ45 WAN port (Support LAN mode), Support full/half duplex, MDI/MDI-X adaptive, and Support 1.5kV electromagnetic isolation

100M LAN

1 channel 10/100Base-T(X) adaptive 100M RJ45 LAN port, Support full/half duplex, MDI/MDI-X adaptive, Support 1.5kV electromagnetic isolation

serial port

Serial port type: 1 channel RS485

Connection method: 3.81mm pitch 3PIN terminal block

Baud rate: 300bps-230400bps

Data bits: 5bit, 6bit, 7bit, 8bit

Stop bit: 1bit, 2bit

Check digit: None, Odd, Even

Terminal resistor: Built-in 120Ω terminal resistor, set through jumper cap

Serial port isolation: 2.5kVDC

antenna interface

4-way SMA-K (external thread internal hole) antenna Interface for connecting 5G cellular antennas

SIM card interface

2-way Nano SIM card slot, dual SIM card single standby, Support 5G/4G triple network and 3G China Unicom

indicator light

Power indicator light, operation indicator light, LAN port indicator light, WAN port indicator light, serial port indicator light, mobile network indicator light, mobile signal strength indicator light, support external indicator light pins

Power Supply

power input

DC 9~24V

Power consumption

<5.5W@DC12V (full load)

MIR682-Exi-QG (Qualcomm module) can be used with 900mA@18V intrinsically safe power supply

MIR682-Exi-UC can be used with 1.5A@12V intrinsically safe power supply and meets the intrinsically safe ib certification requirements

Connection method

5.08mm pitch 2PIN terminal block

Power protection

Anti-reverse connection, slow start, current limiting protection, voltage limiting protection

Physical Characteristics

Dimension

1108522.6 (mm) (excluding interface)

Installation method

Embedded installation

weight

About 0.13kg (excluding antenna)

Working Environment

Operating temperature

-40℃~+70℃

storage temperature

-40℃~+85℃

Relative humidity

5%~95% (no condensation)

Industry Standard

EMC

IEC61000-4-5 (Surge): Level 3 (power supply: common mode ±2kV, differential mode ±1kV;

Network port, serial port: common mode ±4kV, differential mode ±2kV)

IEC61000-4-4 (EFT): Level 4 (power supply: ±4kV; network port, serial port: ±2kV)

Industry Standard

EMC

IEC61000-4-5 (Surge): Level 3 (power supply: common mode ±2kV, differential mode ±1kV;

Network port, serial port: common mode ±4kV, differential mode ±2kV)

IEC61000-4-4 (EFT): Level 4 (power supply: ±4kV; network port, serial port: ±2kV)

NAME

VERSION

download

MIR682-Exi Datasheet

V1.0

Standard model

100M WAN Port

100M LAN Port

RS485

5G Antenna Interface

Input Voltage

MIR682-Exi-QG (Qualcomm module)

1

1

1

4

DC 9~24V

MIR682-Exi-UC

1

1

1

4

DC 9~24V
Subscribe to Newsletter
Follow Us
Search
Products
Ethernet Switch
PoE Switch
Media Converter
Serial Device Server
Industrial Gateway
Fieldbus Converter
WLAN
Cellular
Solutions
Renewables
Rail Transit
Smart City
State Grid
Oil-Mining
Industrial Automation
Support
Warranty
RMA
Download
Video
Technical Service
Contact

enquiry@maiwe.com

+86 27 87170217

No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China

Copyright © 2024 Maiwe Communication All rights reserved.