Managed Switch

Home ❯ Products ❯ Industrial Switch ❯ Ethernet Switch ❯ Managed Switch
MISCOM7210GBP-2GTS Layer 2 Bypass Switch
  • 10-Port Full Gigabit BY-PASS Managed Industrial Ethernet Switch
Features and Benefits
  • Supports power-down bypass function
  • Support MW-Ring and the recovery time<20ms
  • Online firmware upgrade
  • 2 gigabit by-pass fiber ports+8 gigabit copper ports
GET A QUOTE
  • Overview
  • Specifications
  • Downloads
  • Models
Product Description

 

MISCOM7210GBP Gigabit optical road bypass managed din-rail Industrial Ethernet Switch is designed and developed for industrial high-speed communication network applications. It provides a high-end industrial Ethernet communication solution for flexible industrial applications. It support 2 gigabit fiber ports + 8 gigabit copper ports, adopt store-and-forward mechanism, and have powerful bandwidth processing capabilities.

MISCOM7210GBP series can manage SNMP network management through Web, and provide Mwring, virtual LAN, Trunk,Quality of Service, IGMP Snooping, rate control, port mirroring, static MAC address forwarding table ,Email/Relay fault alarm and firmware online upgrade and so on functions.

The MISCOM7210GBP series supports the automatic connection of the optical port to form a communication path when the switch is powered off, avoiding the paralysis of the entire network communication due to the power failure of multiple communication nodes in the network, and greatly improving the reliability of the network. Products are widely used in comprehensive energy, smart city, rail transit, intelligent transportation, industrial automation and other industrial fields.

Features and Benefits

Features:

-1000Base-X full-duplex single-fiber bidirectional interface, supports power-down bypass function

-10/100/1000Base-TX adaptive Ethernet interface (full duplex, half duplex), support automatic MDI/MDI-X connection

-Embedded web server, remote management and configuration via browser

-Link redundancy self-recovery technology based on MW-Ring technology, the self-healing time is less than 20ms

-Trunk port aggregation

-Implement broadcast storm detection control (including broadcast, multicast, unknown unicast and other storm type detection

- Online firmware upgrade

-Dynamic IGMP Snooping support, filter multicast traffic

-Bandwidth management to prevent unpredictable network problems

-Based on IEEE 802.1Q VLAN

-Support QoS, IEEE802.1p and ToS/DiffServe to improve communication quality

-Support port mirroring for online debugging

-Real-time network time synchronization

-Restrict accessible IP, manage switches in the network

 

Software performance

Redundancy protocol

Support MW-Ring and the recovery time<20ms.

Support MSTP/RSTP 

Multicast routing

Support IGMP snooping/ IGMP v1/v2

Support GMRP

Support static multicast

Switching functions

Support VLAN, GVRP

Support port speed limit, support storm suppression

Support port trunking

Support port flow control

Management and maintenance

Support Console and Web management methods

Support SNMPv1/v2c
Support unified PC software management

Technical specifications

Ethernet Standard

802.3,802.3u,802.3z,802.3x,802.1p,802.1Q,802.1d/w and so on.

Switch properties

VLAN number

4096

MAC table

8k

Switch Bandwidth

20Gbps

Interface

Gigabit ports

2x1000Base-X

Luminous power: >-12dBm (single-mode) >-17dBm (multi-mode)

Light receiving sensitivity: <-38dBm (single-mode) <-35dBm (multi-mode)

Wavelength: 1310nm (single mode), 1550nm (single mode)

850 nm (multimode), 1310 nm (multimode)

Transmission distance: multimode fiber 850nm, 2km; 1310 nm, 2/5km

Single mode fiber 1310nm, 20/40/60km; 1550nm, 20/40/60/80/120km

Connector type: SC

Transmission rate: 1.25Gbps (gigabit)

Copper port

Physical interface: RJ45 with shield, IEEE802.3 standard

Transmission distance: 100 meters (standard CAT5/CAT5e cable)

8x10/100/1000Base-T RJ45 ports

RJ45 port: 10Base-T/100Base-TX/1000Base-TX, support auto-negotiation function

Terminal block for power input

5.08mm terminal block

Terminal block for relay alarm

3.81mm terminal block,1A@24VDC

Power Requirements

Power input

Input voltage: DC12~48V, support dual power supply redundancy, non-polarity input

Full-load consumption

<12W@24V(MAX)

Overcurrent protection:

built-in

Working Environment

Operating Temperature

-40°C~75°C

Storage temperature

-40°C~85°C

Ambient Humidity

5%~95%( non-condensing)

Physical Characteristics

Shell

IP40 protection, aluminum alloy shell

Installation

35mm din rail-mounted installation

Dimension

160mmx58mmx122mm

Industry standard

EMC

EN61000-4-2(ESD), Level 4

EN61000-4-4(EFT), Level 4

EN61000-4-5(Surge), Level 3.※The network port supports 6kV lightning protection

Impact

IEC60068–2-27

Falling

IEC60068-2-32

Shock

IEC60068-2-6

Warranty

Warranty

5 Years

Certification

CE/FCC/RoHS

NAME

VERSION

download

MISCOM7210GBP-2GTS data sheet

Version 1.1

Model

Gigabit By-pass port

Gigabit copper port

Power input

MISCOM7210GBP-2GF-8GT

2

8

Dual DC12~48V
Subscribe to Newsletter
Follow Us
Search
Products
Ethernet Switch
PoE Switch
Media Converter
Serial Device Server
Industrial Gateway
Fieldbus Converter
WLAN
Cellular
Solutions
Renewables
Rail Transit
Smart City
State Grid
Oil-Mining
Industrial Automation
Support
Warranty
RMA
Download
Video
Technical Service
Contact

enquiry@maiwe.com

+86 27 87170217

No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China

Copyright © 2024 Maiwe Communication All rights reserved.