Managed Switch

Home ❯ Products ❯ Industrial Switch ❯ Ethernet Switch ❯ Managed Switch
MISCOM7208TSN-2GF-6GT Layer 2, 8-Port TSN Switch
  • 2×Gigabit SFP Ports, 6×10/100/1000Base-T(X) Ports (RJ45 Connector)
  • DIN Rail Gigabit Managed Industrial TSN Switch
Features and Benefits
  • Support TSN standard (IEEE 802.1AS/Qbv/Qbu/CB/Qci), providing clock synchronization, low latency flow control and reliability mechanisms
  • Support redundancy protocols such as Fast Ring (MW-Ring), ERPSv1/v2, STP/RSTP/MSTP, to improve network reliability
  • Support dual DC9~60V power input and single AC85~264V/DC110~370V power supply
  • With IP40 high-strength aluminum alloy shell and fanless design, the device can reliably work in harsh industrial environment ranging from -40°C to +75°C
GET A QUOTE
  • Overview
  • Specifications
  • Downloads
  • Models
Product Description

MISCOM7208TSN-2GF-6GT series is 8-port full Gigabit layer 2 managed DIN rail TSN industrial Ethernet switch, which achieves reliable and deterministic low latency transmission of flows and support 2 Gigabit SFP ports and 6×10/100/1000Base-T(X) ports. It has strong bandwidth processing capabilities. It can automatically detect data packet errors, reduces transmission failures, and easily supports Gigabit networking, ensuring stable, reliable, and efficient data transmission. It uses industrial grade components, combined with high standard system design and production control, 35mm standard DIN-rail installation, high-strength aluminum alloy shell, sturdy and durable. Fanless and efficient heat dissipation, work at a wide temperature range of -40°C to +75°C. High standard industrial protection design, adapt to various harsh working environments, and with stable communication performance.

MISCOM7208TSN-2GF-6GT series switch follows the main communication standards in the industrial field, meets with real-time communication and network security. It provides multiple ways to manage the switch, such as accessing the switch command line (CLI) through the CONSOLE port or TELNET/SSH protocol, accessing the switch web interface through HTTP/HTTPS, and accessing the device MIB through the SNMP protocol. It supports various network protocols and industry standards, such as TSN, PTP, ERPS, MW-Ring, STP/RSTP/MSTP, VLAN, QoS, LACP, IGMP Snooping, LLDP, 802.1X, ACL, RMON, DHCPv4 client/server/listener/relay, NTP, port mirroring, DDM, Ping, Traceroute, etc. It supports system management of uploading and downloading configuration files, upgrading and backing up image files online. In terms of structural installation, DIN-rail mounting or wall mounting are optional. This product is widely applicable in fields of comprehensive energy, smart cities, rail transit, intelligent transportation and industrial automation.

Features and Benefits
  1. Support link static aggregation and dynamic aggregation LACP, which can increase transmission bandwidth, improve link reliability, and achieve network load sharing
  2. Support port statistics, count different bytes or types of data frames sent and received, and monitor port traffic
  3. Support 802.1Q VLAN and provides Access, Trunk, and Hybrid interfaces for easy partitioning of multiple broadcast domains, enhancing network security
  4. Support VLAN partitioning based on MAC, protocols, IP subnets, streams, and other methods, suitable for networks in different environments
  5. Support IGMP snooping and multicast filtering for layer 2 multicast forwarding or filtering, saving network resources
  6. Support Link Layer Discovery Protocol (LLDP), enabling the acquisition of LLDP neighbor device information for link status monitoring, facilitating topology management and fault localization
  7. Support Ethernet Ring Protection Switching (ERPS), providing multi-ring networking, link backup, fast convergence, and enhanced network stability
  8. Support fast ring network MW-Ring private protocol and STP/RSTP/MSTP spanning tree protocol, which can eliminate network loops and improve network reliability
  9. Support loop back detection to prevent network storms
  10. Support various login methods such as HTTP, HTTPS, TELNET, SSH, and CONSOLE ports
  11. Support SNMPv1/v2c/v3, enabling information queries, modifications, and troubleshooting through the MIB network management system, achieving centralized management
  12. Support RMON remote network monitoring, perform statistics and alarms on various types of data frames, and can be used for remote monitoring and management of network management systems
  13. Support port security, converting dynamic MAC addresses into secure dynamic/static/Sticky MAC, enhance device security
  14. Support 802.1X port authentication for user identity verification, providing both local and RADIUS-based login authentication.
  15. Support AAA secure network management mechanism, authentication, authorization, and billing through radius and TACACS+ to prevent illegal user login
  16. Support ACL access control list, customizable filtering rules for multiple frame types, filtering or rate limiting specified packets
  17. Support IPv4 and IPv6 source defense attacks, bind ports, source IP, source MAC, and VLAN to prevent source IP address spoofing
  18. Support ARP protection to prevent network interruption or information leakage caused by ARP flooding/spoofing attacks
  19. Support Quality of Service (QoS) to prioritize voice, video, and critical data for transmission, addressing network congestion.
  20. Support port mirroring, allowing the collection of data from ingress and egress ports for network diagnostics and fault management.
  21. Support DDM digital diagnostic monitoring, detecting temperature, voltage, transmitted optical power, received optical power of the DDM fiber module
  22. Support Ping IPv4/IPv6 and Traceroute IPv4/IPv6 to detect network connectivity and locate fault points
  23. Support DHCPv4 server, centrally manage and configure user IP addresses dynamically
  24. Support DHCPv4 listening, ensuring that DHCP clients obtain IP addresses from legitimate DHCP servers to prevent DHCP attacks
  25. Support DHCPv4 relay to assist DHCP servers in dynamically allocating network parameters to DHCP clients
  26. Support system logging of user operations, system security, system failures, and remote monitoring of Syslog servers
  27. Support dual power redundancy failure alarm and port disconnection alarm, and Support relay alarm mode

Software

Switching

Support 802.1Q VLAN, VLAN based on MAC/IP subnet/protocol/stream, VLAN translation, PVLAN

Support port configuration, such as port speed, duplex mode, flow control, maximum transmission unit, and etc.

Support port speed limit, storm suppression, storm detection, and port statistics

Support port aggregation, static aggregation, dynamic aggregation LACP

Support MAC address aging and learning limitations, static MAC address binding

TSN

IEEE 802.1AS (generalized PTP, gPTP)

IEEE 802.1Qbu (Frame Preemption, FP)

IEEE 802.1Qbv (Time-Aware Shaper, TAS)

IEEE 802.1Qci (Per-Stream Filtering and Policing, PSFP)

IEEE 802.1CB (Frame Replication and Elimination for Reliability, FRER)

Redundancy

Support fast ring network MW-Ring private protocol

Support ERPSv1/v2

Support STP/RSTP/MSTP

Support loop back detection

Multicast

Support IGMP Snooping

Support multicast filtering

Security Management

Support HTTPS, SSH service control, HTTP/HTTPS, SNMP, TELNET/SSH access management

Support privilege level and port security

Support 802.1X port authentication, AAA authentication, radius, TACACS+ protocols

Support source IPv4/IPv6 protection and ARP protection

Support ACL and filters data from L2-L4 layers

Management and Maintenance

Support IEEE 1588v2 (Precision Time Protocol, PTP)

Support QoS, SP, DWRR queue scheduling

Support DHCPv6 clients, DHCPv4 clients/servers/listeners/relays

Support SNMPv1/v2c/v3, SNMP Trap v1/v2c/v3, RMON, LLDP, LLDP MED

Support port mirroring, DDM, Ping IPv4/IPv6, Traceroute IPv4/IPv6

Support user permission management, logging, NTP client, and daylight saving time

Support configuration file upload/download/activation/deletion, dual mirror backup, restart, and factory reset

Switch Capability

Processing Type

Store-and-Forward

Backplane Bandwidth

23Gbps

Buffer Size

1.25Mbit

Mac Address Table

8K

Interface

1G Fiber Port

2×1000Base-X SFP ports

1G Copper Port

6×10/100/1000Base-T(X) auto-sensing RJ45 ports, support full/half duplex and auto MDI/MDI-X

Relay

1 relay alarm output, 5.08mm pitch 3-pin terminal block

CONSOLE

1 console port with RS232 signal on a RJ45 connector, used for device debugging

Button

One-click restart or restore the factory settings

Indicator Light

Power indicator, operation indicator, alarm indicator, optical port indicator, TSN indicator light, ring indicator, TX port speed and connection/activity indicator

Power Supply

MISCOM7208TSN-2GF-6GT

MISCOM7208TSN-2GF-6GT-AD220

Input Voltage

Dual DC9~60V power input, non-polarity

Single AC85~264V/DC110~370V power supply

Power Consumption

＜12W@DC12V(full load)

＜12W@AC220V

Connection

5.08mm pitch 5-pin terminal block

Protection

Built-in over-current protection

Physical Characteristics

Dimensions

160×58×122 mm (DIN rail mounting clip excluded)

Installations

Easy installation on 35mm DIN rails

IP Code

IP40

Weight

DC model is about 0.86kg and AC model is about 0.9kg

Working Environment

Operating Temp

-40℃~+75℃

Storage Temp

-40℃~+85℃

Relative Humidity

5%~95% (non-condensing)

Industry Standard

MISCOM7208TSN-2GF-6GT

MISCOM7208TSN-2GF-6GT-AD220

EMC

IEC 61000-4-2 (ESD): Level 4

  • Contact discharge ± 8kV
  • Air discharge ± 15kV

IEC 61000-4-5 (Surge): Level 4

  • Power supply: common mode ± 4kV, differential mode ± 2kV
  • Ethernet port: common mode ± 4kV, differential mode ± 2kV

IEC 61000-4-4(EFT): Level 4

  • Power supply: ± 4kV
  • Ethernet port: ± 2kV

IEC 61000-4-2 (ESD): Level 4

  • Contact discharge ± 8kV
  • Air discharge ± 15kV

IEC 61000-4-5 (Surge): Level 3

  • Power supply: common mode ± 2kV, differential mode ± 2kV
  • Ethernet port: common mode ± 4kV, differential mode ± 2kV

IEC 61000-4-4(EFT): Level 4

  • Power supply: ± 4kV
  • Ethernet port: ± 2kV

Certification

CE, FCC, RoHS

NAME

VERSION

download

MISCOM7208TSN-2GF-6GT-Datasheet-V1.0-231019

V1.0

Standard Model

1G Fiber Port

1G Copper Port

Input Voltage

MISCOM7208TSN-2GF-6GT

2

6

Dual DC9~60V power input

MISCOM7208TSN-2GF-6GT-AD220

2

6

Single AC85~264V/DC110~370V power supply
Subscribe to Newsletter
Follow Us
Search
Products
Ethernet Switch
PoE Switch
Media Converter
Serial Device Server
Industrial Gateway
Fieldbus Converter
WLAN
Cellular
Solutions
Renewables
Rail Transit
Smart City
State Grid
Oil-Mining
Industrial Automation
Support
Warranty
RMA
Download
Video
Technical Service
Contact

enquiry@maiwe.com

+86 27 87170217

No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China

Copyright © 2024 Maiwe Communication All rights reserved.