MIEN5108 series is a layer 2 managed embedded industrial Ethernet switch, integrating serial ports and CAN ports. It provides 8*100M Ethernet ports, 4*RS485 and 2*CAN ports. The 100M ethernet ports support multiple interface combinations such as 8*copper ports model (MIEN5108), 2*fiber and 6*copper ports model (MIEN5108-2F), and 4*fiber and 4*copper ports model (MIEN5108-4F). It supports embedded installation method, meets the needs of various industrial buses and ethernet network sites, can adapt to various harsh working environments, and has stable communication performance.
The MIEN5108 supports WEB network management function and various network protocols, such as MW-Ringv1/v2, ERPS, STP/RSTP, VLAN, LACP, LLDP, SNMPv1/v2c/v3, QoS, 802.1X, IGMP snooping, WEB access control, static aggregation, port mirroring, static multicast MAC address binding, network diagnosis, email logs, alarms, SNTP, system logs, and system online upgrades, which can improve network performance, reliability, and security, meet the needs of various complex networks. It supports multiple working modes such as UDP, UDP Multicast, TCP Client/Server, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, RealCOM_MCP/CCP/MW, Pair Connection Master/Slave, HTTPD Client, WebSocket Client, etc., to achieve serial port to Ethernet or Modbus TCP protocol conversion. And supports network working modes such as UDP, TCP Client/Server, UDP multicast, etc., to achieve CAN terminal device networking. This product meets the requirements of complex networks and harsh industrial environments through strict testing of functions, high and low temperatures, safety regulations and EMC. It can be widely used in fields such as comprehensive energy, smart cities, rail transit, intelligent transportation, smart factories, and industrial automation.
Software |
|
Switching |
Support port configuration, rate configuration, storm detection, port trunk, LACP, and port statistics Support 802.1Q VLAN Support MAC address aging and static MAC address binding |
Serial Port |
Support multiple network working modes such as UDP, UDP Multicast, TCP Client/Server, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, RealCOM_MCP/CCP/MW, Pair Connection Master/Slave, HTTPD Client, WebSocket Client, etc. Support packet length, packet interval, and network connection information Support Modbus slave address mapping, Modbus pre reading, and Modbus Over TCP Support heartbeat packets, registration packets, frame header and footer modes, and RFC2217 functions |
CAN Port |
Support network working modes such as UDP, TCP Client/Server, UDP multicast, etc. Support packet frame rate, packet interval, CAN ID filtering, and network connection information |
Redundancy |
Support MW-Ring/MW-RingV2 private ring network technology Support ERPS Support RSTP and is compatible with STP |
Multicast |
Support IGMP Snooping Support static multicast MAC address binding |
Safety Management |
Support WEB access control Support 802.1X port authentication Support relay alarms and email logs |
Management and Maintenance |
Support QoS, SNMP v1/v2c/v3, SNMP v1/v2c/v3 TRAP, LLDP Support port mirroring and Ping Support user permission management, system logs, local/network time synchronization, daylight saving time Support online restart, factory reset, system upgrade, and configuration file upload/download Support MW-NMPv2, MixView, MaxView management |
Switch Capability |
|
Processing Type |
Store-and-Forward |
Backplane Bandwidth |
2Gbps |
Buffer Size |
1Mbit |
MAC Table Size |
2K |
Interface |
|
100M Fiber Port |
2/4*100Base-FX fiber ports, support SC/FC/ST connector, single-mode/multimode, wavelength, transmission distance optional |
100M Copper Port |
8/6/4*10/100Base-T(X) auto-sensing RJ45 ports, full/half duplex, auto MDI/MDI-X connection |
Serial Port |
Port type: 4 RS485 serial ports Port signal: A, B, GND Baud rate: 300bps-460800bps Data bit: 7bit, 8bit Stop bit: 1 bit, 2 bit Check bit: no check, odd check, even check Connector: two 3.81 mm pitch 6-pin terminal blocks |
CAN Port |
Port type: 2 CAN bus ports Port signal: CANH, CANL, GND Baud rate: 5kbps -1000kbps Connector: 3.81 mm pitch 6-pin terminal block |
Relay |
2 relay alarm input, 1 relay alarm output, 3.81 mm pitch 6-pin terminal block |
Button |
Restart and factory reset |
Status LED |
Power LED, Operation LED, Alarm LED, Ring LED, port LED, Serial port LED, CAN port LED |
Power Supply |
|
Input Voltage |
DC9~36V |
Power Consumption |
<5.5W@DC24V |
Connection |
5.08mm pitch 2-pin terminal block |
Physical Characteristics |
|
Dimensions |
180x130x31 mm (not containing port connectors) |
Installations |
Embedded installation |
Weight |
About 0.5kg |
Working Environment |
|
Operating Temp |
-40℃~+85℃ |
Storage Temp |
-40℃~+85℃ |
Relative Humidity |
5%~95% (non-condensing) |
NAME |
VERSION |
download |
---|---|---|
Version 1.1 |
Standard Model |
100M Fiber Port |
100M Copper Port |
RS485 Port |
CAN Port |
Input Voltage |
MIEN5108-4D485-2CAN |
/ |
8 |
4 |
2 |
DC9~36V |
MIEN5108-2F(M/S)-4D485-2CAN |
2 |
6 |
4 |
2 |
|
MIEN5108-4F(M/S)-4D485-2CAN |
4 |
4 |
4 |
2 |
+86 27 87170217
No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China