MISCOM8028GX-4XGF-16GF-8GC layer 3 10G Industrial Ethernet Switch is a high-performance Ethernet communication product developed for industrial communication. MISCOM8028GX-4XGF-8GC-16GF supports 4 10G fiber ports + 8 Gigabit combo ports + 16 Gigabit fiber ports interface configuration. It is a 19-inch rack mounted switch which supports front panel mounting and rear panel installation. In addition it riches layer 2 software features such as port, VLAN, multicast, QoS, and fast redundancy ring, MISCOM8028GX-4XGF-8GC-16GF supports static and dynamic routing, multicast routing, and supports multiple management of Console and Web. It provides high performance and high reliability solutions for industrial communication.
-Supports 4 10-Gigabit Fx ports + 8 Gigabit combo ports + 16 Gigabit Fx ports
-Support RIP, OSPF, PIM Layer 3 routing protocols
-Supports multiple redundant networking mechanisms such as MW-Ring, MSTP, VRRP, and EAPS
-Support multiple management methods to support centralized network management
-Single rib type fanless design
-Front and rear indicator design
-Meet IEC61850-3 standard and State Grid level A standard
Software performance |
|
Switch Function |
Support VLAN, GVRP Support port speed limit Support storm suppression Support port aggregation Support port flow control |
Redundancy protocol |
Support VRRP, EAPS Support MW-Ring ring network technology Support MSTP/RSTP, compatible with STP |
Multicast routing |
Support IGMP v1/v2/v3, IGMP Snooping Support GMRP Support for static multicast |
Routing technology |
Support RIPv1/v2, RIPng, OSPFv1/v2 Support static routing protocol Support PIM-SM, PIM-DM |
Service quality management |
Support ACL to filter L2-L7 layer data Support SP, WRR queue scheduling |
Management and maintenance |
Support Console, Telnet, WEB management mode, RMON Support SNMPv1/v2c, which can be managed centrally through MWview Support FTP, TFTP file transfer and software upgrade Supports power failure alarms, power alarms, port alarms, and ring alarms. Support port mirroring, Syslog, LLDP, RTC, SNTPv4 IP supports DHCP server/relay/client |
Technical specifications |
|
Ethernet Standard |
IEEE802.3-10BaseT, IEEE802.3u-100BaseTX/100Base-FX, IEEE802.3x-Flow Control, IEEE802.3z-1000BaseLX, IEEE802.3ab-1000BaseTX, IEEE802.1ab, IEEE802.1D-Spanning Tree Protocol, IEEE802.1w-Rapid Spanning Tree Protoco, IEEE802.1Q-VLAN Tagging, IEEE802.1s Multiple Spanning Tree Protocol, IEEE802.1p-Class of Service, IEEE802.1X-Port Based Network Access Control, GVRP, RIPv1/v2, OSPFv1/v2/v3, VRRP, DHCP, CLI, EAPS, Qos, LACP, LLDP, IGMP, PIM, SNMP, SNTP, SSH |
Switch properties |
|
Priority queue |
8 |
VLAN number |
4096 |
IGMP multicast groups |
512 |
MAC address |
16K |
Switch Bandwidth |
128Gbps |
Route Table |
16K |
Switch Delay |
<5μs |
Interface |
|
10-Gigabit ports |
Port numbers: 4 |
Connector: SFP type Fx port |
|
Baud rate:10G Base-Lx (Fx port) |
|
Gigabit ports |
Port numbers: 24 |
Connector: 16 Gigabit Fx ports +8 Gigabit combo ports |
|
Baud rate: 1000Base-Lx ( Fx port), 10/100/1000M adaptive Tx port |
|
Console port |
RS232/RJ45 |
Terminal block for power input |
5.08mm terminal block |
Terminal block for relay alarm |
5.08mm terminal block,1A@24VDC |
Communication distance |
|
Twisted-pair |
100m (standard CAT5/CAT5e cable) |
Multimode fiber |
Gigabit multi mode: 850nm 550m |
Single mode fiber |
Gigabit single mode: 1310nm 20km |
LED indicator lights |
|
Front panel LED |
Port light: LINK/ACT;SPEED |
Running light: RUN |
|
Power LED: PWR1/ PWR2 |
|
Alarm LED: AlARM |
|
Back panel LED |
RJ45 Tx port light: LINK/ACT; SPEED |
Fiber indicator: LINK/ACT |
|
Power Requirements |
|
Power input |
AC/DC220V(85-264VAC/110-370VDC) |
Full-load consumption |
<40W@full load |
Overload protection |
Support |
Reverse protection |
Support |
Redundancy protection |
Support |
Working Environment |
|
Operating Temperature |
-40°C~85°C |
Storage temperature |
-40°C~85°C |
Ambient Humidity |
5%~95%( non-condensing) |
Physical Characteristics |
|
Shell |
IP40 protection,aluminium alloy shell |
Installation |
19" 1U rack mounted for front and rear outlet installation |
Dimension |
482.6mm*44mm*315mm (W*H*D) |
Industry standard |
|
EMC |
EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 4 EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4 EN61000-4-6 (CS), Level 4 EN61000-4-8, Level 5 |
Impact |
IEC60068–2-27 |
Falling |
IEC60068-2-32 |
Shock |
IEC60068-2-6 |
Warranty |
|
Warranty |
5 Years |
Certification |
|
Certification |
CE,FCC,RoHS |
NAME |
VERSION |
download |
---|---|---|
Version 1.1 |
||
Version 2.0 |
Ordering Information |
|
MISCOM8028GX-4XGF-8GC-16GF-AD220 |
4 10 Gigabit Fx port + 16 Gigabit Fx ports + 8 Gigabit combo ports, layer 3 managed rack-mount industrial Ethernet switch, single AC85~264V/DC110~370V isolate power supply |
enquiry@maiwe.com
+86 27 87170217
No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China