MISCOM8028GX-20GF-8GC-Maiwe Communication | Connect the world, smarter the future

Layer 3 Ethernet Switches

Home ❯ Products ❯ Industrial Ethernet Switch ❯ Layer 3 Ethernet Switches

Wuhan Maiwe Communication Co., Ltd. was established in 2001, committing to Industrial Ethernet Switches, EN50155 Switches, Embedded Communication Modules, Device Networking Products, Industrial Wireless Equipment and IIoT related products over 20 years. The products have penetrated into the power, rail transit, industrial automation, new energy, mining, military industry, environmental protection, petrochemicals and industrial controlling fields. Its main products support standard protocol like RSTP, MSTP, VRRP, EAPS, OSFP, Modbus and so on, also have obtained CE, FCC, RoHS, EN50155 and some other international certifications.

MISCOM8028GX-20GF-8GC

20*1G SFP ports, 8*1G Combo ports, Layer3 Rackmount Gigabit Industrial Ethernet Switch

Features and Benefits

8 Gigabit combo ports + 20 Gigabit SFP ports
Support RIP/OSPF/PIM Layer 3 Routing Protocol
Support MW-Ring/MSTP/VRRP/EAPS for network redundancy
IEC61850-3 certified, meet State Grid Class A standard

Online consultation

Overview
Specifications
Download
Ordering Information

Product Description

MISCOM8028GX layer 3 full Gigabit Industrial Ethernet Switch is a high-performance Ethernet communication product developed for industrial communication. MISCOM8028GX supports 8 Gigabit combo ports + 20 Gigabit Fx ports. MISCOM8028GX is a 19-inch rack mount that supports front panel mounting and rear panel mounting. Except for layer 2 software features such as port, VLAN, multicast, QoS, and fast redundancy ring, MISCOM8028GX also supports static and dynamic routing and multicast routing, supports multiple management modes of Console and Web, as well as network management software of the host computer, it can provide high performance and highly reliable solutions for industrial communications.

Features and Benefits

-8 Gigabit combo ports +20 Gigabit SFP ports

-Support RIP/OSPF/PIM Layer 3 Routing Protocol

-Support MW-Ring/MSTP/VRRP/EAPS for network redundancy

-Support multiple management methods and network centralized management

-Single rib type fanless design

-Front and rear indicator design

-IEC61850-3 certified, meet State Grid Class A standard

Software performance
Switch Function	Support VLAN Support GVRP Support port aggregation Support flow control. Support Rate limit Support broadcast storm suppression
Redundancy protocol	Support VRRP/EAPS Support MW-Ring and the recovery time<20 ms. Support RSTP/MSTP and compatible with STP
Multicast Routing	Support IGMP snooping/ IGMP v1/v2/v3 Support GMRP Support static multicast.
Unicast Routing	Support RIPv1/v2/RIPng/OSPFv1/v2 Support Static Routing Support PIM-SM/PIM-DM/PIM-DMv6
Service quality management	Support ACL and L2-L4 data Filter Support SP/ WRR queuing
IP management	Support DHCP server/relay/client
Management and maintenance	Support Console/Telnet/and Web management methods Support SNMPv1/v2c / MWview centralized management Support FTP/TFTP file transfer and software update Support power failure alarm/power alarm/ port link down alarm/ring alarm Support port mirroring/Syslog/ LLDP/ SNTP
Technical specifications
Ethernet Standard	IEEE802.3-10BaseT IEEE802.3u-100BaseTX/100Base-FX IEEE802.3x-Flow Control IEEE802.3z-1000BaseLX IEEE802.3ab-1000BaseTX IEEE802.1ab IEEE802.1D-Spanning Tree Protocol IEEE802.1w-Rapid Spanning Tree Protoco IEEE802.1Q -VLAN Tagging IEEE802.1s Multiple Spanning Tree Protocol IEEE802.1p -Class of Service IEEE802.1X-Port Based Network Access Control GVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/LACP/LLDP/IGMP/PIM/SNMP/SNTP/SSH
Switch properties
Priority queue	8
VLAN ID	4096
IGMP Groups	512
MAC table	16k
Switch Bandwidth	56Gbps
Route Table	8k
Switch Delay	<5μs
Interface
Gigabit ports	Port numbers: 28
	Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port
	Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port
Console port	RS232/ RJ45
Terminal block for power input	5.08mm terminal block
Terminal block for relay alarm	5.08mm terminal block,1A@24VDC
Communication distance
Twisted-pair	100m(CAT5/CAT5e cable)
Multimode fiber	Gigabit multi-mode: 850nm, 550m
Single mode fiber	Gigabit single mode: 1310nm, 20km
LED indicator lights
Front panel LED	Port light: LINK/ACT; SPEED
	Running light: RUN
	Power LED: PWR1, PWR2
	Alarm LED: Alarm
Rear panel LED	RJ45 LED: LINK/ACT; SPEED
Rear panel LED	Fiber LED: LINK/ACT
Power Requirements
Power input	AC/DC220V(85-264VAC/110-370VDC)
Full-load consumption	<40W
Overload protection	Support
Reverse protection	Support
Redundancy protection	Support
Working Environment
Operating Temperature	-40°C~85°C
Storage temperature	-40°C~85°C
Ambient Humidity	5%~95%( non-condensing)
Physical Characteristics
Shell	IP40 protection, aluminum alloy shell
Installation	19" 1U rack mounted for front and rear outlet installation
Dimension	482.6 mmx44mmx315mm
Industry standard
EMC	EN61000-4-2(ESD), Level 4 EN61000-4-3(RS), Level 4 EN61000-4-4(EFT), Level 4 EN61000-4-5(Surge), Level 4 EN61000-4-6(CS), Level 4 EN61000-4-8, Level 5
Impact	IEC60068–2-27
Falling	IEC60068-2-32
Shock	IEC60068-2-6
Warranty
Warranty period	5 Years
Certification
Certification	CE, FCC, RoHS

NAME	VERSION	download
MISCOM8028GX-20GF-8GC Series Datasheet	Version 2.0
MISCOM8028GX-20GF-8GC Series User Manual	Version 1.1

*Ordering Information*
MISCOM8028GX-8GC-20GF-AD220	8 Gigabit combo ports + 20 Gigabit Fx ports, layer 3 full Gigabit rack-mounted industrial Ethernet switch, single AC85-264V/ DC110~370V isolated power supply

Subscribe to Newsletter

Renewables

Rail Transit

Smart City

State Grid

Oil-Mining

Industrial Automation

Warranty

RMA

Download

Video

Technical Service

Maiwe News

Product News

Industry Trends

Events

Profile

History

Honor

Why US

Layer 3 Ethernet Switches

MISCOM8028GX-20GF-8GC

Features and Benefits

Product Description

Features and Benefits

Follow Us

Search