Layer 3 Ethernet Switches

MISCOM8028G-4GF-8GC-16GT
  • 8 Gigabit Combo Ports + 4 Gigabit SFP Ports +16 10/100/1000M RJ45 Ports Rack-mount Layer 3 Full Gigabit Industrial Ethernet Switch
Features and Benefits
  • 8 Gigabit Combo Ports + 4 Gigabit SFP ports +16 10/100/1000M RJ45 Ports
  • Support RIP/OSPF/PIM Layer 3 Routing Protocol
  • Support MW-Ring/MSTP/VRRP/EAPS for network redundancy
  • Support multiple management methods and network centralized management
  • IEC61850-3 certified, State Grid Class A standard
Online consultation
  • Overview
  • Specifications
  • Download
  • Ordering Information
Product Description

MISCOM8028G layer 3 full Gigabit Industrial Ethernet Switch is a high-performance Ethernet communication product specially developed by Maiwe for industrial communication. It supports 8 Gigabit Combo ports + 4 Gigabit Fx ports + 16 Gigabit Tx ports interface configurations. MISCOM8028G is a 19-inch rack-mounted installation that supports front panel installation and rear panel installation.

Features and Benefits

-8 Gigabit Combo Ports + 4 Gigabit SFP ports +16 10/100/1000M RJ45 Ports

-Support RIP/OSPF/PIM Layer 3 Routing Protocol

-Support MW-Ring/MSTP/VRRP/EAPS for network redundancy

-Support multiple management methods and network centralized management

-Single rib type fanless design

-Front and rear indicator design

-IEC61850-3 certified, State Grid Class A standard

Software performance

Switch Function

Support VLAN
Support GVRP
Support port aggregation
Support flow control
Support Rate limit
Support broadcast storm suppression

Redundancy protocol

Support VRRP/EAPS
Support MW-Ring and the recovery time<20 ms
Support RSTP/MSTP and compatible with STP 

Multicast technology

Support IGMP snooping/ IGMP v1/v2/v3

Support GMRP
Support static multicast

Unicast Routing

Support RIPv1/v2/RIPng/OSPFv1/v2

Support Static Routing

Support PIM-SM/PIM-DM

Service quality management

Support ACL and L2-L7 data Filter
Support SP/ WRR queuing

IP management

Support DHCP server/relay/client

Management and maintenance

Support Console/Telnet/and Web management methods
Support SNMPv1/v2c
Support FTP/TFTP file transfer and software update 
Support power failure alarm/power alarm/ port link down alarm/ring alarm
Support port mirroring/Syslog/ LLDP/ RTC/SNTPv4

Technical specifications

Ethernet Standard

IEEE802.3-10BaseT

IEEE802.3u-100BaseTX/100Base-FX

IEEE802.3x-Flow Control, IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX

IEEE802.1ab

IEEE802.1D-Spanning Tree Protocol

IEEE802.1w-Rapid Spanning Tree Protoco

IEEE802.1Q -VLAN Tagging

IEEE802.1s Multiple Spanning Tree Protocol

IEEE802.1p -Class of Service
IEEE802.1X-Port Based Network Access Control

GVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/

LACP/LLDP/IGMP/PIM/SNMP/SNTP/SSH

Switch properties

Priority queue

8

VLAN ID

4096

IGMP Groups

512

MAC table

16k

Switch Bandwidth

56Gbps

Route Table

8k

Switch Delay

<5μs

Interface

Gigabit ports

Port numbers: 28

Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port

Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port

Console port

RS232, RJ45

Terminal block for power input

5.08mm terminal block 

Terminal block for relay alarm

5.08mm terminal block, 1A@24VDC

Communication distance

Twisted-pair

100m(CAT5/CAT5e cable)

Multimode fiber

Gigabit multi-mode: 850nm 550m

Single mode fiber

Gigabit single mode: 1310nm 20km

LED indicator lights

Front panel LED

Port light: LINK/ACT, SPEED

Running light: RUN

Power LED: PWR1, PWR2

Alarm LED: Alarm

Rear panel LED

RJ45 LED: LINK/ACT, SPEED

Fiber LED: LINK/ACT

Power Requirements

Power input

AC/DC220V(85-264VAC/110-370VDC)

Full-load consumption

<27W

Overload protection

Support

Reverse protection

Support

Redundancy protection

Support

Working Environment

Operating Temperature

-40°C~70°C

Storage temperature

-40°C~85°C

Ambient Humidity

5%~95%( non-condensing)

Physical Characteristics

Shell

IP40 protection, aluminum alloy shell

Installation

19" 1U rack mounted for front and rear outlet installation

Dimension

482.6 mmx44mmx315mm

Industry standard

EMC

EN61000-4-2(ESD),Level 4

EN61000-4-3(RS),Level 4

EN61000-4-4(EFT),Level 4

EN61000-4-5(Surge),Level 4

EN61000-4-6(CS),Level 4

EN61000-4-8,Level 5

Impact

IEC60068–2-27

Falling

IEC60068-2-32

Shock

IEC60068-2-6

Warranty

Warranty

5 Years

Certification

Certification

CE, FCC, RoHS

NAME

VERSION

download

MISCOM8028G-4GF-8GC-16GT Series Datasheet

Version 2.0

 

Ordering Information

MISCOM8028G-8GC-4GF-16GT-AD220

8 Gigabit combo ports +4 Gigabit Fx ports +16 Gigabit Tx ports, layer 3 full Gigabit rack-mounted industrial Ethernet switch, single AC85-264V/ DC110~370V isolate power supply

Subscribe to Newsletter
Copyright 2022 Maiwe Communication All rights reserved.