Layer 3 Ethernet Switches

MISCOM8020G-4GF-16GT
  • 4 Gigabit SFP Ports + 16 Gigabit RJ45 Ports Layer 3 Rack Mounted Industrial Ethernet Switch
Features and Benefits
  • Support 4 Gigabit Fx ports + 16 Gigabit Tx ports interface configuration
  • Support RIP, OSPF, PIM layer 3 routing protocol
  • Support multiple redundant networking mechanisms such as MW-Ring, MSTP, VRRP, EAPS, etc.
Online consultation
  • Overview
  • Specifications
  • Download
  • Ordering Information
Product Description

MISCOM8020G layer 3 full Gigabit Industrial Ethernet Switch is a high-performance Ethernet communication product specially developed for industrial communication. It supports 4 Gigabit Fx ports + 16 Gigabit Tx ports interface configurations. It is rack-mounted installation, supports front panel installation and rear panel installation. MISCOM8020G not only supports rich layer 2 software features such as ports, VLANs, multicast, QoS, and fast redundant rings, but also supports static and dynamic routing, multicast routing, and supports multiple management methods of Console, Web, and host computer network management software, to provide high-performance and highly reliable solutions for industrial communications.

Features and Benefits

-Support 4 Gigabit Fx ports + 16 Gigabit Tx ports interface configuration

-Support RIP, OSPF, PIM layer 3 routing protocol

-Support multiple redundant networking mechanisms such as MW-Ring, MSTP, VRRP, EAPS, etc.

-Support multiple management methods and network centralized management

-Single rib type fanless shell design

-Front and rear indicator lights design

-Conforms to IEC61850-3 standard, and meets A-level standard of State Grid

Software performance

Switch Function

Support VLAN, GVRP

Support port speed limit

Support storm suppression

Support port aggregation

Support port flow control

Redundancy protocol

Support VRRP/EAPS
Support MW-Ring and the recovery time<20 ms
Support RSTP/MSTP and compatible with STP 

Multicast Routing

Support IGMP snooping/ IGMP v1/v2/v3

Support GMRP
Support static multicast. 

Routing technology

Support RIPv1 / v2, RIPng, OSPFv1 / v2

Support static routing protocol

Support PIM-SM, PIM-DM

Service quality management

Support ACL and L2-L7 data Filter
Support SP/ WRR queuing

Management and maintenance

Support Console, Telnet, WEB management mode, RMON

Support SNMPv1 / v2c

Support FTP, TFTP file transfer and software upgrade

Support power failure alarm, power alarm, port alarm, ring alarm

Support port mirroring, Syslog, LLDP, RTC, SNTPv4

IP supports DHCP server / relay / client

Technical specifications

Ethernet Standard

IEEE802.3-10BaseT

IEEE802.3u-100BaseTX/100Base-FX

IEEE802.3x-Flow Control

IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX

IEEE802.1ab

IEEE802.1D-Spanning Tree Protocol

IEEE802.1w-Rapid Spanning Tree Protocol

IEEE802.1Q -VLAN Tagging

IEEE802.1s Multiple Spanning Tree Protocol

IEEE802.1p -Class of Service
IEEE802.1X-Port Based Network Access Control

GVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/LACP/LLDP/IGMP/PIM/SNMP/SNTP/SSH

Switch properties

Priority queue

8

VLAN ID

4096

IGMP Groups

512

MAC table

16k

Switch Bandwidth

40Gbps

Route Table

8k

Switch Delay

<5μs

Interface

Gigabit ports

Port numbers: 20

Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port

Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port

Console port

RS232/ RJ45

Terminal block for power input

5.08mm terminal block 

Terminal block for relay alarm

5.08mm terminal block,1A@24VDC

Communication distance

Twisted-pair

100m(CAT5/CAT5e cable)

Multimode fiber

Gigabit multi-mode: 850nm, 550m

Single mode fiber

Gigabit single mode: 1310nm, 20km

LED indicator lights

Front panel LED

Port light: LINK/ACT; SPEED

Running light: RUN

Power LED: PWR1, PWR2

Alarm LED: Alarm

Rear panel LED

RJ45 LED: LINK/ACT; SPEED

Fiber LED: LINK/ACT

Power Requirements

Power input

AC/DC220V(85-264VAC/110-370VDC)

Full-load consumption

<15W

Overload protection

Support

Reverse protection

Support

Redundancy protection

Support

Working Environment

Operating Temperature

-40°C~85°C

Storage temperature

-40°C~85°C

Ambient Humidity

5%~95%( non-condensing)

Physical Characteristics

Shell

IP40 protection, aluminum alloy shell

Installation

19" 1U rack mounted for front and rear outlet installation

Dimension

482.6 mmx44mmx210mm

Industry standard

EMC

EN61000-4-2(ESD), Level 4

EN61000-4-3(RS), Level 4

EN61000-4-4(EFT), Level 4

EN61000-4-5(Surge), Level 4

EN61000-4-6(CS), Level 4

EN61000-4-8, Level 5

Impact

IEC60068–2-27

Falling

IEC60068-2-32

Shock

IEC60068-2-6

Warranty

Warranty period

5 Years

Certification

Certification

CE, FCC, RoHS

NAME

VERSION

download

MISCOM8020G-4GF-16GT Series Datasheet

Version 2.0

Ordering  Information

MISCOM8020G-4GF-16GT-AD220

4 Gigabit Fx ports +16 Gigabit Tx ports, layer 3 full Gigabit ports managed rack-mounted industrial Ethernet switch, single AC85-264V/DC110~370V isolated power supply

Subscribe to Newsletter
Copyright 2022 Maiwe Communication All rights reserved.