MISCOM8052G-4XGF-48GT-Maiwe Communication | Connect the world, smarter the future

Layer 3 Ethernet Switches

Home ❯ Products ❯ Industrial Ethernet Switch ❯ Layer 3 Ethernet Switches

MISCOM8052G-4XGF-48GT

4x10G Gigabit SFP Ports + 48 Gigabit RJ45 Ports Rack-mount Layer 3 Managed Industrial Ethernet Switch

Features and Benefits

Support MW-Ring patent redundancy protocol
Support RIP, OSPF, PIM Layer 3 routing protocols
IEC61850 standard
IP40 protection

Online consultation

Overview
Specifications
Download
Ordering Information

Product Description

MISCOM8052G layer 3 full Gigabit Ethernet switch is a high-performance Ethernet communication product. It supports 4x10-Gigabit fiber ports + 48 Gigabit copper ports interface configurations. MISCOM8052G is a 19-inch rack mount that supports front panel mounting and rear panel mounting. It not only supports port, VLAN, multicast, QoS, fast redundancy ring etc. layer 2 software features, but also supports static and dynamic routing, multicast routing, and supports multiple management methods of Console and Web, as well as network management software of the host computer. It provides high performance and highly reliable solutions for communications.

Features and Benefits

-Support 4 10-Gigabit fiber ports + 48 Gigabit copper ports interface configurations

-Support RIP, OSPF, PIM Layer 3 routing protocols

-Supports multiple redundant networking mechanisms such as MW-Ring, MSTP, VRRP, and EAPS

-Support multiple management methods to support centralized network management

-Front and rear indicator design

-Meet IEC61850-3 standard

-Meet State Grid level A standard

Software performance
Switch Function	Support VLAN, GVRP Support port speed limit, Support storm suppression Support port aggregation, Support port flow control
Redundancy protocol	Support VRRP, EAPS Support MW-Ring ring network technology Support MSTP/RSTP, compatible with STP
Multicast routing	Support IGMP v1/v2/v3, IGMP Snooping Support GMRP Support for static multicast
Routing technology	Support RIPv1/v2, RIPng, OSPFv1/v2 Support static routing protocol Support PIM-SM, PIM-DM
Service quality management	Support ACL to filter L2-L7 layer data Support SP, WRR queue scheduling
Management and maintenance	Support Console, Telnet, WEB management mode, RMON Support SNMPv1/v2c, which can be managed centrally through MWview Support FTP, TFTP file transfer and software upgrade Supports power failure alarms, power alarms, port alarms, and ring alarms. Support port mirroring, Syslog, LLDP, RTC, SNTPv4 IP supports DHCP server/relay/client
Technical specifications
Ethernet Standard	IEEE802.3-10BaseT IEEE802.3u-100BaseTX/100Base-FX IEEE802.3x-Flow Control, IEEE802.3z-1000BaseLX IEEE802.3ab-1000BaseTX, IEEE802.1ab IEEE802.1D-Spanning Tree Protocol, IEEE802.1w-Rapid Spanning Tree Protocol IEEE802.1Q -VLAN Tagging IEEE802.1s Multiple Spanning Tree Protocol IEEE802.1p -Class of Service IEEE802.1X-Port Based Network Access Control GVRP, RIPv1/v2, OSPFv1/v2/v3, VRRP, DHCP, CLI, EAPS, Qos, LACP, LLDP, IGMP, PIM, SNMP, SNTP, SSH
Switch properties
Priority queue	8
VLAN number	4096
IGMO multicast groups	1K
MAC address	64K
Switch Bandwidth	176Gbps
Route Table	16K
Switch Delay	<5μs
Interface
10-Gigabit ports	Port numbers: 4
	Connector: SFP type Fx port
	Baud rate:10G Base-Lx (Fx port)
Gigabit ports	Port numbers: 48
	Connector: RJ45 adaptive Tx ports
	Baud rate:1000Base-Lx ( Fx port), 10/100/1000M adaptive Tx port
Console port	RS232/RJ45
Terminal block for power input	5.08mm terminal block
Terminal block for relay alarm	5.08mm terminal block,1A@24VDC
Communication distance
Twisted-pair	100m (standard CAT5/CAT5e cable)
Multimode fiber	Gigabit multi mode: 850nm 550m
Single mode fiber	Gigabit single mode: 1310nm 20km
LED indicator lights
Front panel LED	Port light: LINK/ACT; SPEED
	Running light: RUN
	Power LED: PWR1/ PWR2
	Alarm LED: AlARM
Back panel LED	RJ45 Tx port light: LINK/ACT; SPEED
Back panel LED	Fiber indicator: LINK/ACT
Power Requirements
Power input	AC/DC220V(85-264VAC/110-370VDC)
Full-load consumption	<70W@full load
Overload protection	Support
Reverse protection	Support
Redundancy protection	Support
Working Environment
Operating Temperature	-10°C~60°C
Ambient Humidity	5%~95%( non-condensing)
Physical Characteristics
Installation	19" 2U rack mounted for front and rear outlet installation
Dimension	482.6mm88mm315mm (WHD)
Industry standard
EMC	EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 4 EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4 EN61000-4-6 (CS), Level 4 EN61000-4-8, Level 5
Impact	IEC60068–2-27
Falling	IEC60068-2-32
Shock	IEC60068-2-6
Warranty
Warranty	5 Years
Certification
Certification	CE,FCC,RoHS

NAME	VERSION	download
MISCOM8052G-4XGF-48GT	Version 2.0

Ordering Information
MISCOM8052G-4XGF-48GT-AD220	4x10 Gigabit fiber ports +48 Gigabit RJ45 ports, layer 3 10G managed rack-mounted aggregation Ethernet switch

Subscribe to Newsletter

Renewables

Rail Transit

Smart City

State Grid

Oil-Mining

Industrial Automation

Warranty

RMA

Download

Video

Technical Service

Maiwe News

Product News

Industry Trends

Events

Profile

History

Honor

Why US

Layer 3 Ethernet Switches

MISCOM8052G-4XGF-48GT

Features and Benefits

Product Description

Features and Benefits

Follow Us

Search