MISCOM7028G-4GF-8GC-16GT-AD220-Maiwe Communication | Connect the world, smarter the future

Layer 2 Rackmount Managed Ethernet Switches

Home ❯ Products ❯ Industrial Ethernet Switch ❯ Layer 2 Rackmount Managed Ethernet Switches

Wuhan Maiwe Communication Co., Ltd. was established in 2001, committing to Industrial Ethernet Switches, EN50155 Switches, Embedded Communication Modules, Device Networking Products, Industrial Wireless Equipment and IIoT related products over 20 years. The products have penetrated into the power, rail transit, industrial automation, new energy, mining, military industry, environmental protection, petrochemicals and industrial controlling fields. Its main products support standard protocol like RSTP, MSTP, VRRP, EAPS, OSFP, Modbus and so on, also have obtained CE, FCC, RoHS, EN50155 and some other international certifications.

MISCOM7028G-4GF-8GC-16GT-AD220

16*10/100/1000Base-T ports, 8*1G Combo ports, 4*1G SFP ports, Layer 2 Rackmount Gigabit Managed Industrial Ethernet Switch

Features and Benefits

Support MW-Ring patent redundancy protocol
Working temperature -40°C~85°C
IEC61850 standard
IP40 protection

Online consultation

Overview
Specifications
Download
Ordering Information

Product Description

MISCOM7028G series layer 2 full Gigabit industrial Ethernet switch is a high-performance Ethernet communication product developed by Maiwe for industrial communication. The product uses high-performance industrial-grade switch chip, supports 8 Gigabit combo ports + 4 Gigabit fiber ports + 16 Gigabit copper ports, AC220V/DC110V industrial power input. It has good stability for network communication and save wiring.

Features and Benefits

-Support 8 Gigabit Combo ports+4 Gigabit SFP ports+16 Gigabit RJ45 ports

-Support status display with front and back side indicator lights

-Support MW-Ring patent redundancy technique (failure recovery time <20ms)

-Support static multicast filtering, IGMP Snooping

-Supports broadcast storm suppression and port rate control

-Support isolated power supply, optional dual redundant power supply

-Support power off, fiber off, storm and other status relay alarm output

-Support managed function such as VLAN, QoS, Trunking, and port mirroring

-Wide temperature range design, fanless thermal design

-Satisfy harsh industrial environment

Software function
Switch Properties	Supports Rate limit, Trunking, flow control, VLAN, IEEE 802.1Q VLAN and broadcast storm suppression
Redundancy Protocols	Support MW-Ring patent redundancy technique (failure recovery time <20ms) Support MSTP/RSTP
Multicast	Support IGMP v1/v2/v3, IGMP Snooping Support GMRP, static multicast filtering
Security	Support IEEE 802.1x, HTTP, RADIUS, user grading and MAC address binding
Service quality management	Supports SP and WRR queuing Support QoS setting
IP address management	Support DHCP server
Management and maintenance	Supports CLI, Web management methods, LLDP and SNTPv4 Support SNMPv1/v2c, ACL Support software updating Supports the IP/MAC address conflict alarm Support power off, power alarm, port alarm Support port mirroring; Support log viewing Support Link-check Support NTP Support accept and transfer frame statistics
Technical parameters
Protocol Standard	IIEEE802.3-10BaseT IEEE802.3u-100BaseTX IEEE802.3x-Flow Control IEEE802.3z-1000BaseLX IEEE802.3ab-1000BaseTX IEEE802.1D-Spanning Tree Protocol IEEE802.1w-Rapid Spanning Tree Protocol IEEE802.1Q -VLAN Tagging IEEE802.1p -Class of Service IEEE802.1X-Port Based Network Access Control
Switch capability
Priority Queues	8
VLAN Number	4096
IGMP multicast group	512
MAC Table Size	16K
Backplane bandwidth	56Gbps
Switch Delay	<5μs
Interface
Gigabit ports	Port numbers: 28
	Connector: SFP fiber port(LC connector, single-mode/multi-mode) & RJ45 for copper port
	Baud rate: 1000Base-LX (optical port), Self-adaption 10/100/1000MBase-TX
Console port	RS232, RJ45
Terminal block for relay alarm	5.08mm terminal block, 1A@24VDC
Terminal block for power input	5.08mm terminal block
Communication distance
Twisted-pair	100m(CAT5/CAT5e cable)
Multi-mode fiber	Gigabit multi-mode: 850nm, 500m
Single-mode fiber	Gigabit single-mode: 1310nm, 20km
LED indicator lights
Front panel LED lights	Port light: LINK/ACT; SPEED
	System work light: RUN
	Power status light:PWR1; PWR2;
	Alarm light: ALARM
Back panel LED lights	RJ45 port light: LINK/ACT; SPEED
Back panel LED lights	Fiber light: LINK/ACT
Power
Input power	AC/DC220V (85-264VAC/110-370VDC)
Power consumption	<27W@(MAX)
Overload protection	Support
Reverse protection	Support
Redundancy protection	Support
Working Environment
Operating Temperature	-45°C~85°C
Storage temperature	-40°C~85°C
Ambient Humidity	5%~95%
Physical Characteristics
Shell	IP40 protection, aluminum alloy shell
Installation	Standard 19-inch rack mounting
Dimension	482.6mm×44mm×315mm
Industry standard
EMC	EN61000-4-2(ESD), Level 4 EN61000-4-3(RS), Level 4 EN61000-4-4(EFT), Level 4 EN61000-4-5(Surge), Level 4 EN61000-4-6(CS), Level 4 EN61000-4-8, Level 5
Impact	IEC60068–2-27
Falling	IEC60068-2-32
Shock	IEC60068-2-6
Warranty
Warranty	5 Years
Certification
Certification	CE, FCC, RoHS

NAME	VERSION	download
MISCOM7028G data sheet	Version 1.1
MISCOM7028G User Manual	Version 1.1

Ordering Information
MISCOM7028G-4GF-8GC-16GT-AD220	8 Gigabit Combo ports + 4 Gigabit Fx ports + 16 Gigabit Tx ports, single AC85-264V/DC110~370V isolate power supply

Subscribe to Newsletter

Renewables

Rail Transit

Smart City

State Grid

Oil-Mining

Industrial Automation

Warranty

RMA

Download

Video

Technical Service

Maiwe News

Product News

Industry Trends

Events

Profile

History

Honor

Why US

Layer 2 Rackmount Managed Ethernet Switches

MISCOM7028G-4GF-8GC-16GT-AD220

Features and Benefits

Product Description

Features and Benefits

Follow Us

Search