ISM7100S-2GF-3D-2C is a layer 2 gigabit managed embedded switch module, integrating serial port device and CAN device networking. It provides 2 Gigabit Ethernet ports and 8 100M Ethernet ports, supporting fiber or copper port optional. It also provides 3 TTL UART and 2 TTL CAN ports, which can expand RS232/485 serial port and CAN bus port. This switch adopts a storage and forward mechanism, with powerful bandwidth processing capabilities, automatically troubleshooting data packet errors, reducing transmission failures, and ensuring stable, reliable, and efficient data transmission. The hardware is a low-power, wide temperature, and modular design, with a compact structure and small size, which is easy to install and maintain. It can flexibly install and customize interface connection methods. It uses industrial grade components, operating at a wide temperature from -40 ℃ to+75 ℃, embedded installation, able to adapt to various harsh working environments.
The ISM7100S-2GF-3D-2C supports WEB network management function and various network protocols, such as MW-Ringv1/v2, ERPS, STP/RSTP, VLAN, LACP, LLDP, SNMPv1/v2c/v3, QoS, 802.1X, IGMP Snooping, WEB access control, static aggregation, port mirroring, static multicast MAC address binding, network diagnosis, email logs, alarms, SNTP, system logs, and system online upgrades, which can improve network performance, reliability, and security, meet the needs of various complex networks. It supports multiple network working modes such as UDP, UDP Multicast, TCP Client/Server, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, RealCOM_MCP/CCP/MW, Pair Connection Master/Slave, HTTPD Client, WebSocket Client, etc., to achieve serial port to Ethernet or Modbus TCP protocol conversion. And supports network working modes such as UDP, TCP Client/Server, UDP multicast, etc., to achieve CAN terminal device networking. This product meets the requirements of complex networks and harsh industrial environments through strict testing of functions, high and low temperatures, safety regulations and EMC. It can be widely used in fields such as comprehensive energy, smart cities, rail transit, intelligent transportation, smart factories, and industrial automation.
Software |
|
Switching |
Support port configuration, rate configuration, storm detection, port trunk, LACP, and port statistics Support 802.1Q VLAN Support MAC address aging and static unicast MAC address binding |
Serial Port |
Support multiple network working modes such as UDP, UDP Multicast, TCP Client/Server, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, RealCOM_MCP/CCP/MW, Pair Connection Master/Slave, HTTPD Client, WebSocket Client, etc. Support packet length, packet interval, and network connection information Support Modbus slave address mapping, Modbus pre reading, and Modbus Over TCP Support heartbeat packets, registration packets, frame header and footer modes, and RFC2217 functions |
CAN |
Support network working modes such as UDP, TCP Client/Server, UDP multicast, etc. Support packet frame rate, packet interval, CAN ID filtering, and network connection information |
Redundancy |
Support MW-RingV1/MW-RingV2 private ring network technology Support ERPS Support RSTP and is compatible with STP |
Multicast |
Support IGMP Snooping Support static multicast MAC address binding |
Safety Management |
Support WEB access control Support 802.1X port authentication Support relay alarms and email logs |
Management and Maintenance |
Support QoS, SNMP v1/v2c/v3, SNMP v1/v2c/v3 TRAP, LLDP Support port mirroring and Ping Support user permission management, system logs, local/network time synchronization, daylight saving time Support online restart, factory reset, system upgrade, and configuration file upload/download Support MW-NMPv2, MixView, MaxView management |
Switch Capability |
|
Processing Type |
Store-and-Forward |
Backplane Bandwidth |
7.6Gbps |
Buffer Size |
1Mbit |
MAC Table Size |
8K |
Interface |
|
Gigabit Ethernet port |
2*Gigabit Ethernet ports, can extend to be 10/100/1000Base-T(X) copper port or 1000Base-X fiber port |
100M Ethernet port |
8*100M Ethernet ports, can extend to be 10/100Base-T(X) copper port or 100Base-FX fiber port |
TTL UART |
Quantity: 3 serial ports Port type: 3.3V TTL UART, can be connected to external serial port chip to extend RS232/485 serial port Baud rate: 300bps-460800bps Data bit: 7bit, 8bit Stop bit: 1 bit, 2 bit Check bit: no check, odd check, even check |
TTL CAN |
Quantity: 2 CAN bus ports Port type: 3.3V TTL CAN port, can be connected to external CAN transceiver chips to extend CAN bus port Baud rate: 5kbps -1000kbps |
Alarm |
1 alarm output and 2 alarm input |
CONSOLE |
1 TTL UART for equipment debugging |
Power Supply |
|
Input Voltage |
DC3.3V(±3%) |
Power Consumption |
<2.2W@DC3.3V(full load) |
Physical Characteristics |
|
Dimensions |
75×50×11.6(mm) |
Installations |
Embedded |
Weight |
About 42g |
Working Environment |
|
Operating Temp |
-40℃~+75℃ |
Storage Temp |
-40℃~+85℃ |
Relative Humidity |
5%~95% (non-condensing) |
NAME |
VERSION |
download |
---|---|---|
V1.1 |
Standard Model |
Gigabit port |
100M Port |
UART |
CAN |
Input Voltage |
ISM7100S-2GF-3D-2C |
2 |
8 |
3 |
2 |
DC3.3V |
+86 27 87170217
No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China