The IEM304 Series industrial serial server module is used for adding an Ethernet port to enable network monitoring and control of the serial device. This allows users to remotely monitor and control the serial device over a network, reducing the need for on-site maintenance and improving efficiency. The embedded mounting IEM304-2D-2C module integrates serial device networking, CAN device networking, Modbus gateway, CAN relay and CAN to serial conversion and other functions. The IEM304-2D-2C supports one 10/100Base-T(X) port, 2 TTL serial ports and 2 TTL CAN ports.
The server module can be managed via WEB and supports various network protocols, such as IP, ARP, UDP, TCP, ICMP, HTTP, Modbus TCP, Modbus RTU / ASCII, HTTPD, WebSocket, RealCOM, RFC2217, DHCP Client, DNS, etc. Its CAN port or serial port supports various network transmission modes, such as UDP, UDP Multicast, TCP Client / Server, Pair Connection Master / Slave, Modbus TCP / RTU / ASCII, Httpd Client, WebSocket Client, etc. It supports CAN and serial port interface conversion, and virtual com port function.
The 4 port embedded server module supports hardware watchdog, and reset, factory reset, designed with indicators. It features low power consumption, wide temperature range, compact modular design. The surface mounted female header is easy to easy and maintain, flexible for PCBA and customize interface connection mode. Developed with industrial components, high performance low power processor, the module can work reliably in multiple harsh environments with -40℃ - + 85℃ wide temperature range. The products can be widely used in industrial automation, comprehensive energy, intelligent transportation, smart city, smart mining and other fields.
CAN port supports UDP, UDP Multicast, TCP Client/Server, Pair Connection Master/Slave, Modbus TCP Slave,Relay Mode,CAN to Serial,Httpd Client,WebSocket Client operating modes
CAN baud rate 5kbps-1000kbps
CAN support Normal, Loopback, Listen modes
Support CAN ID filter
Serial port supports UDP, UDP Multicast, TCP Client/Server,Modbus RTU Master/Slave,Modbus ASCII Master/Slave, RealCOM_MCP/CCP/MW, Pair Connection Master/Slave, Httpd Client, WebSocket Client, CAN to Serial and other conversion modes to realize conversion from serial to ethernet, CAN or Modbus RTU/ASCII protocols
Serial baud rate 600bps-921600bps
Support data packaging mechanism to enable conversion from CAN or serial to Ethernet
Support serial port and CAN port communication parameters, working mode, send and receive frame counts
Support network address static configuration and DHCP protocol dynamic acquisition
Support user permission management
Support the network logging, remote server monitoring
Support online upgrade and factory reset
Software |
|
Serial Port Working Mode |
UDP, UDP Multicast, TCP Client, TCP Server, Modbus RTU Master, Modbus RTU Slave, Modbus ASCII Master, Modbus ASCII Slave, RealCOM_MCP, RealCOM_CCP, RealCOM_MW, Pair Connection Master, Pair Connection Slave,Httpd Client, WebSocket Client, CAN to Serial |
CAN Port Working Mode |
UDP, UDP Multicast, TCP Client, TCP Server, Pair Connection Master, Pair Connection Slave, Modbus TCP Slave, Relay Mode, CAN to Serial, Httpd Client, WebSocket Client |
System Management |
DHCP Client, DNS User permission management Serial port, CAN port statistics, network log reboot Upgrade and factory reset |
Interface |
|
Ethernet |
1×10/100Base-T(X) auto-sensing ethernet pin, full/half duplex, auto MDI/MDI-X, 1.5 kV isolation protection, built-in network transformer |
TTL Serial Port |
Type: 3.3V TTLport Baud rate: 600bps-921600bps Data bit: 7bit, 8bit Stop bit: 1bit, 2bit Parity bit: None, Odd, Even |
TTL CAN Port |
Type: 3.3V TTL CAN port Baud rate: 5kbps-1000kbps |
Status LEDs |
Support the RUN, Ethernet port Link/ACT, Ethernet port Speed, serial port indicator pins |
Power Supply |
|
Input Voltage |
DC 3.3V(DC 3~3.6V) |
Power Consumption |
<0.7W@DC3.3V (full load) |
Connection |
2×1.27mm pitch 2*16P surface mounted female header (pins included) |
Physical Characteristic |
|
Dimensions |
45×32×9.9 mm |
Installations |
Embedded mounted |
Weight |
15g |
Working Environment |
|
Operating Temp |
-40℃~+85℃ |
Storage Temp |
-40℃~+85℃ |
Relative Humidity |
5%~95% (non-condensing) |
Industry Standard |
|
Certification |
CE, FCC, RoHS |
NAME |
VERSION |
download |
---|---|---|
Version 1.1 |
Standard Model |
10/100M Ethernet Port |
TTL Serial Port |
TTL CAN Port |
Input Voltage |
IEM304-2D-2C |
1 |
2 |
2 |
DC 3.3V (DC 3~3.6V) |
+86 27 87170217
No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China